A study on the core loading pattern of the VVER-1200/V491

Tran Vinh Thanh1, Tran Viet Phu1, Nguyen Thi Dung1
1 Institute for Nuclear Science and Technology, 179 Hoang Quoc Viet, Ha Noi

Main Article Content

Abstract

The VVER-1200/V491 was a selected candidate for the Ninh Thuan I Nuclear Power Plant. However, in the Feasibility Study Safety Analysis Report (FS-SAR) of the VVER-1200/V491, the core loading pattern of this reactor was not provided. To assess the safety features of the VVER- 1200/V491, finding the core loading patterns and verifying their safety characteristics are necessary. In this study, two core loading patterns of the VVER-1200/V491 were suggested. The first loading pattern was applied from the VVER-1000/V446 and the second was searched by core loading optimization program LPO-V. The calculations for power distribution, the effective multiplication factor (k-eff), and fuel burn-up were then calculated by SRAC code. To verify several safety parameters of loading patterns of the VVER-1200/V491, the neutron delayed fraction (DNF), fuel and moderator temperature feedbacks (FTC and MTC) were investigated and compared with the safety standards in the VVER-1200/V491 FS-SAR or the VVER-1000/V392 ISAR.

Article Details

References

[1]. Ninh Thuan 1 Nuclear Power Plant Project Feasibility Study, NT1.0-3.101-FS-01.03.01.06.02-rev02, 2015.
[2]. Yoshiaki Oka, “Nuclear Reactor Design”, Springer, 2014.
[3]. Mohammed S.Dwiddar, Alya Badawi, Hanaa Abou Gabal, Ibrahim A. El-Osery “From VVER-1000 to VVER-1200: Investigation of the Effect of the Changes in Core” PHYTRA 3 – The Third International Conference on Physics and Technology of Reactors and Application. Tetouan, Morocco, May 12-14-2014.
[4]. Davood Babazadeh, Mehrdad Boroushaki, Caro Lucas, “Optimization of fuel core loading pattern design in a VVER nuclear power reactors using Particle Swarm Optimization (PSO)”, Annals of Nuclear Energy 36, 923–930, 2009.
[5]. M. Rafiei Karahroudia, S.A. Mousavi Shirazi, K. Sepanloo, “Optimization of designing the core fuel loading pattern in a VVER-1000 nuclear power reactor using the genetic algorithm”, Annals of Nuclear Energy 57, 142–150, 2013.
[6]. Tran Viet Phu et al. ,“Study on the VVER core optimization loading”, Ministerial Project, 2015-2016.
[7]. K. Kumura, T. Kugo, K. Kaneko and K. Tsuchihashi, “SRAC2006: A comprehensive neutronics calculation code system”, JAEA-Data/Code, 2007.
[8]. Yashar Rahmani, Ali Pazirandeh, Mohammad B. Ghofrani, Mostafa Sadighi, “Calculation of the deterministic optimum loading pattern of the BUSHEHR VVER-1000 reactor using the weighting factor method”, Annals of Nuclear Energy 49, p.170-181, 2012.
[9]. Risk Engineering LTD., Belene ISAR - Training course provided for Vietnam Atomic Energy Institute VINATOM, Sofia, Bungari, 15 Jan – 9 March 2012.