Article Sidebar

PDF
Published: 2016-09-30
Abstract Views: 119
Views PDF: 33
DOI: https://doi.org/10.53747/jnst.v6i3.162
Issue
Vol. 6 No. 3 (2016)
Section
Articles
How to Cite
Le , M. T., Tran , K. A., Cao , V. C., & Phan , P. T. (2016). Research and design of the moving system for the cobalt-60 industrial irradiator . Nuclear Science and Technology, 6(3), 31-39. https://doi.org/10.53747/jnst.v6i3.162

Research and design of the moving system for the cobalt-60 industrial irradiator

Le Minh Tuan1, Tran Khac An1, Cao Van Chung1, Phan Phuoc Thang1
1 Research and Development Center for Radiation Technology

Main Article Content

Abstract

On the way of localization of Cobalt-60 industrial irradiators, Research and Development Center for Radiation Technology (VINAGAMMA) has successfully designed and manufactured the first version of Co-60 industrial irradiator, VINAGA1. The second version of Co-60 industrial irradiator has been studied and designed by VINAGAMMA in the frame of the scientific project No. ĐTCB.02/15/TTNCTK. The nucleus of a Co-60 industrial irradiator is a mechanical system inside an irradiation room namely a tote box moving system. This report presents the tote box moving system designed by VINAGAMMA. The tote box moving system contains 52 tote boxes with the dimensions of 50 cm (w) × 70 cm (l) × 150 cm (h) that are moving around the source racks in the manner of 4 passes and 2 levels. The irradiator with this tote box moving system has good specifications: The minimum time of an irradiation cycle is 1h 20 min. and the dose uniformity ratio (DUR) at the product densities of 0.1 g/cm3 and 0.5 g/cm3 is 1.4 and 1.8, respectively. Radiation energy utilization efficiency at the product densities of 0.1 g/cm3 and 0.5 g/cm3 is 19.7% and 48.8%, respectively. These specifications meet the requirements for a multi-purpose Co-60 industrial irradiator and the present irradiation requirements in Vietnam.

Article Details

Keywords

Tote box moving system, irradiator, cobalt-60, density, dose uniformity ratio (DUR)

References

[1] Le Minh Tuan, et al, Summary report of the scientific project of Ministry of Industry and Trade, “Research, design and pilot manufacture of the moving system for a Co-60 industrial irradiator”, Code 04/HĐ-ĐT 2010, 2013.
[2] J.F. Briesmeister, MCNP- A General Monte Carlo N-Particle Transport Code, LA 1265-M, Version 4C Los Alamos National Laboratory, Los Alamos, 2000.
[3] Nguyen Huu Loc, Manual of Autodesk Inventor, Ho Chi Minh City Publisher, 2008.
[4] Radiation safety of Gamma and Electron Irradiation facilities, IAEA, Safety series No. 107, 1992.
[5] Safe design and use of Panoramic, wet source storage gamma irradiators (Category IV), American National Standard N43.10, July 1984.
[6] Gamma Irradiators for Radiation Processing, IAEA, Vienna, Austria, 2005.
[7] Operation and Maintenance Manual for SVST-Co60/B type irradiator, Institute of Isotopes Co. Ltd., 2nd Edition, Vol. 1, 2, 3, May 1999.
[8] Nguyen Thi Yen, Lectures on mechanical materials, Hanoi Publisher, 2005.