Studying on design of a complet pilot plant for processing sandstone ores in Pa Lua – Pa Rong area
Main Article Content
Abstract
Design, construction and operation of a pilot for processing uranium containing ores are important stages in the process of project development of uranium production from ores because uranium contained minerals and the composition of minerals are unstable factors. In this case, pilot needs to be a simulation of a plant in the future, but with upgrade equipment compared that at laboratory scale. Results of lab research were used to select the most appropriate process for ore processing and selection of equipment for each stages.
In the circumstance when there has been a lack of experience in processing uranium ores in Vietnam, the design and construction of such a pilot with completed technological procedures are essential. The main purpose of this work is to verify results of lab researches and optimize operational parameters of the process. In addition, several purposes were also considered such as study on the effects of solution circulation/recycling and accummulation of impurities in a long run; obtain necessary and sufficient information for design, cost estimate for investment and operation... The pilot only can achieve the expected objectives when ore sources (including reserves and characteristics) are determined; a complete technological process for obtaining technical uranium (yellowcake) is designed; investment and operational capitals are estimated and these estimates show the costs and benefits of the process.
In this article, the authors will focus on the presentation of research results, including data on ore, process technology, material balance, pilot scale, the basic parameters of equipments, installation diagram of equipments, construction, power and water needs identification, preliminary calculation of investment and operational costs.
Article Details
Keywords
pilot plant, uranium, uranium ore processing
References
[2] Nguyen Boi, Tran Van Lang, Pham Hau Giang, The Fundamentals of Mineral Separation, Transport publishing House, Hanoi, 2011.
[3] Tran Van Hoa, A study for upgrading the heap leach pad to a capacity of 800L for processing of Nong Son uranium ore, Final report of MOST topic, Code No. BO/03/03-3, Hanoi 2005.
[4] Nguyen Quang Hung, Nguyen Phuong, Bui Tat Hop, Uranium ore and its supply capability to the development of nuclear power in Vietnam, http://www.idm.gov.vn/Data/TapChi/2008/A307/a11.htm.
[5] Trinh Xuan Lai, Calculation and Design of waste water processing facilities, Construction publishing House, Hanoi, 2000.
[6] Than Van Lien, A production test for Uranium ore processing, Final report of the national project “Uranium exploration in Palua-Parong area, Quang Nam Province”, Hanoi 2013.
[7] Pham Quang Minh, A thermodynamic study of leaching process for uranium recovery from sand stone, Final report of topic, Code No. CS/05/03-04, 4/2006.
[8] Le Khanh Phon, A study of extraordinary characteristics of Nong Son sandstone, http://www.idm.gov.vn/nguon_luc/Xuat_ban/2006/A293/a10.htm.
[9] Nguyen Ngoc Phu, The principles to design of grinding and particle sorting facilities in a mineral separation, Hanoi, 2008.
[10] Truong Cao Suyen, Nguyen Thi Quynh Anh, Mineral separation plant - Design and safety, Transport publishing House.
[11] Cao Hung Thai, A study for processing of Palua sandstone and recovery of technical uranium with 2 tons of ore batch capacity, Final report of MOST topic, Code No. BO/01/03/02, 2003.
[12] Le Quang Thai, Processing of Palua Uranium ore and recovery of technical Uranium with a batch capacity of 500 kgs of ore, Final report of MOST topic, Code No. BO/06/03-01, 2008.
[13] Le Quang Thai, Comletion of technology and equipment for recovery of yellowcake from Palua sandstone ores by mixing and curing with strong acid and ion exchange, Final report of MOST topic, Code No. ĐT/05-08/NLNT, 2011.
[14] Nguyen Minh Tuyen, Mixing Process and equipments in technology, Construction publishing House, Hanoi, 2006.
[15] Processes and equipments in the chemical industry- Handbook, Vol. 1, Sience and technics publishing House, Hanoi, 1999.
[16] Processes and equipments in the chemical industry- Handbook, Vol. 2, Sience and technics publishing House, Hanoi, 1999.
[17] Vietnam standards TCVN 6696:2009: Solid wastes - Sanitary landfill - General requirements for enviromental protection, Hanoi, 2000.
[18] Vietnam contruction standards TCXDVN 261:2001: Solid wastes landfill- Design standard.
[19] A.A. Lasinxki, A.P.Toltrinxki, Essential compositions and the calculation of chemical engineering- Handbook. Science&Technology Publisher, Leningrat 1973.
[20] .B.N. Xudarykov, E.G. Rakov, Uranium Production - Technology and equipment (in Russian), Matxcova, 1989.
[21] IAEA, Steps for preparing uranium production feasibility studies: A guidebook, TECDOC-885, ISSN 1011-4289, Vienna, Austria, 1996.
[22] IAEA, Guidebook on Design, Construction and Operation, of Pilot Plants, for Uranium Ore Processing, Technical Report Series No. 314, International Atomic Energy Agency, Vienna, 1990.
[23] IAEA, Manual on Laboratory Testing for Uranium Ore Processing, Austria, pages 61-85; 117-118, 1990.
[24] Jacques THIRY - Nicolas DURUPT, Heap Leaching of Low Grade Uranium Ores at SOMAIR, AREVA NC - Business Group Mines, AIEA - Technical Meeting on Low grade Uranium Ore, 29 - 31 March 2010.
[25] Merritt R.C., The Extractive Metallurgy of Uranium, First printing, Library of Congress Catalog Card No. 71-157076, USA, 1971.
[26] Henry Schnell, Extremes of U Processing, Denver, November 10, 2011.
[27] R. Canello, S. and H. Schnell, Piloting of The Bacterial Leach Process at Quebrada Blanca, Compania Minera Quebrada Blanca, Los Leones 212, Providencia Santiago, Chile.