Self-characterization of irradiation facility using synthetic multi-element standard for determination of k0-factors of seven radionuclides of interest
Main Article Content
Abstract
In this study, the k0 factors of 7 short and medium-lived radionuclides (i.e. 66Cu, 52V, 38Cl, 134mCs, 128I, 140La and 56Mn) were experimentally determined at the Dalat nuclear research reactor (DNRR). The synthetic multi-element standard (SMELS) samples were irradiated at Channel 7-1 installed at the DNRR. SMELS Type III contains Au and Zr, thus also allowing the self-characterization of the irradiation facility (i.e. the direct determination of f and a with only this material). The k0 factors of 7 short and medium-lived radionuclides obtained in this work are a good agreement with the reference k0 factors. The ratio values between the experimental and reference k0 values were 66Cu of 1.004, 52V of 1.004, 38Cl of 0.961 and 0.976 (1642.7 keV and 2167.4keV, respectively), 134mCs of 0.831, 128I of 1.022, 140La of 0.936, 0.955 and 0.955 (328.8 keV, 487.0 keV and 1596.2keV, respectively), 56Mn of 0.985 and 0.973 (846.8 keV and 1810.7keV, respectively). The radionuclides range of uncertainty values were lower than 7%. The present result indicates that the k0 factors can be determined by using synthetic multi-element standards (SMELS).
Article Details
Keywords
k0 factor, neutron activation analysis, short-lived and medium-lived radionuclides
References
[2]. H.M. Dung, P.D. Hien, The application and development of k0-standardization method of neutron activation analysis at Dalat research reactor, Journal of Radioanalytical and Nuclear Chemistry, 257, 643-647, 2003.
[3]. e.a. Doanh HV, A new rapid neutron activation analysis system at Dalat nuclear research reactor, Nuclear Science and Technology, 4, 82-91, 2014.
[4]. H. Doanh, C. Vu, T. Thien, P. Son, N. Sy, N. Giang, N. Dien, A new rapid neutron activation analysis system at Dalat nuclear research reactor, Nuclear Science and Technology, 4, 84-91, 2014.
[5]. R. Acharya, A. Nair, A. Reddy, S. Manohar, Validation of a neutron activation analysis method using k0-standardization, Applied Radiation and Isotopes, 57, 391-398, 2002.
[6]. F. De Corte, A. Simonits, Recommended nuclear data for use in the k0-standardization of neutron activation analysis, Atomic Data and Nuclear Data Tables, 85, 47-67, 2003.
[7]. G.L. Molnar, Z. Revay, L. Szentmiklosi, New perspectives for very short-lived neutron activation analysis, Journal of Radioanalytical and Nuclear Chemistry, pp. 157-163, 2003.
[8]. M. Kubešová, J. Kučera, Validation of k0-standardization method in neutron activation analysis—the use of Kayzero for Windows programme at the nuclear physics institute, Řež, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 622, 403-406, 2010.
[9]. F. De Corte, A. Simonits, k 0-Measurements and related nuclear data compilation for (n, γ) reactor neutron activation analysis: IIIb: tabulation, Journal of Radioanalytical and Nuclear Chemistry, 133, 43-130, 1989.
[10]. R. Acharya, J. Holzbecher, A. Chatt, Determination of k0-factors of short-lived nuclides and application of k0-NAA to selected trace element, Nuclear Instruments and Methods in Physics Research A, 680, 2012.
[11]. F. De Corte, The k0-standardization method: a move to the optimization of neutron activation analysis, Habilitation Thesis, Univ. of Gent, 1987.
[12]. R. Acharya, J. Holzbecher, A. Chatt, Determination of k0-factors of short-lived nuclides and application of k0-NAA to selected trace elements, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 680, 1-5, 2012.
[13]. R. Acharya, A. Chatt, Characterization of the Dalhousie University SLOWPOKE-2 reactor for k0-NAA and application to medium-lived nuclides, Journal of Radioanalytical and Nuclear Chemistry, 257, 525-529, 2003.
[14]. H.M. Dung, P.D. Hien, The application and development of k0-standardization method of neutron activation analysis at Dalat research reactor, Journal of Radioanalytical and Nuclear Chemistry, 257, 2003.
[15]. H.M. Dung, Quality evaluation of the k0-standardized neutron activation analysis at the Dalat research reactor, Journal of Radioanalytical and Nuclear Chemistry, 309, 135-143, 2016.
[16]. R. Acharya, K. Swain, A. Kumar, N. Ajith, R. Verma, A. Reddy, Determination of k 0-factors and validation of k0-INAA for short-lived nuclides, Journal of Radioanalytical and Nuclear Chemistry, 286, 507-511, 2010.
[17]. F.D. Corte, A. Simonits, Recommended nuclear data for use in the k0 standardization of neutron activation analysis, Atomic Data and Nuclear Data Tables, 85, 2003.
[18]. H.M. Dung, Determination of k0 and Q0 factors for 5 short-lived radionuclides of interest in k0-NAA, Journal of Radioanalytical and Nuclear Chemistry, 2022.
[19]. M. Kubešová, k0-standardization in neutron activation analysis at LVR-15 reactor in Řež, 2012.
[20]. M.D. Ho, V.D. Ho, Q.T. Tran, N.S. Pham, V.C. Trinh, Q.D. Tran, T.S. Nguyen, M. Blaauw, The k0-standardized method for cyclic, epithermal and prompt gamma neutron activation analysis, 2017.
[21]. k0-database 2020. (n.d.). Kayzero.com. Retrieved December 18, 2022, from http://www.kayzero.com/k0naa/k0naaorg/Nuclear_Data_SC/Entries/2020/8/24_Update_of_k0-database_I-128.html.